0 items
Call Us: (407) 720-6101 | Mon - Fri 9AM - 5PM EST

MTRX AQ - ATSC TO QAM - 4 Antenna Tuners to RF QAM + IP + ASI out

MTRX AQ  - ATSC TO QAM - 4 Antenna Tuners to RF QAM + IP + ASI out
Email a friend Email a friend
Add to Wish List
The MTRX-AQ  ATSC-TO-QAM is a 4x OFF AIR ATSC Antenna Tuners >TO>QAM CABLE + IPTV streaming + ASI out converter transcoder to receive multiple HD/SD Off Air TV channels from 4 concurrent tuners, and output the selected ones to up to 4 QAM COAX CABLE frequencies to all QAM Cable Television, and IPTV Streaming over lan / wifi / internet, and ASI.

It is the perfect solution to receive local TV Channels together with Cable TV channels on all TVs, or to distribute only the wanted selection of channels inside a building

The MTRX-AQ is already compatible with all the ATSC OFF AIR Standards, including ATSC / ATSC 2.0 / ATSC 3.0 and the MPEG2/MPEG4 H264 technologies.

The MTRX-AQ is also available with different types of input tuners ( sat / dvbc / dvbt / isdbt / dmbt ) and output ( atsc / dvbc / dvbt ), flexible for any application where different inputs and outputs are needed.

Each antenna frequency can transport multiple HD & SD TV CHANNELS, and the MTRX-AQ lists all of them on the control software so you can select the ones to output.

In case of scrabled / encrypted channels, the MTRX-AQ comes ready with 4 slots to insert any type of CAM Conditional Access Module from the service provider ( same used on TVs to watch scrambled channels without the external box )

There is no need to insert smart cards for regular free view off air channels, just leave the slots empty.


Example of Most used Cam adaptors to insert smart cards :    http://en.wikipedia.org/wiki/Conditional-access_module
NagraVision NDS VideoGuard Irdeto Conax  

The Selected TV channels can output to both the RF QAM + IP + ASI ports

The RF QAM can be injected directly to the existing coax cable network to distribute the channels to all the Cable QAM TVs, merging with other existing cable channels from the cable operator

The IPTV output can be connected to the existing WIFI/LAN to watch over IPad, Mobile Devices, Tablets, Computers, or our IPdecoder box

Multiple MTRX units can be installed at any time to increase the number of distributed channels as well from different input sources like satellite, ip, asi etc.

The MTRX-AQ installs in Minutes, Easy, just connect your Antenna in ( one antenna can be pass-through to all the 4 tuners using the included coax jumpers and the tuners in/out ports ) and COAX OUT to your TVs, as well the iptv streaming out to your network switch.

The included software allows the remote-control of multiple units also installed in different places, also over the internet with secure login.

The Pro Video Instruments MTRX Multi Receiver is ideal to receive and distribute multiple TV Channels Over internal Coax QAM and IPTV, perfect for Condos and Properties,  Hotels, GYMs, Sports Bars, YMCAs, Corporate Centers, Casinos, Academia, Cruise Liners, Luxury Yachts, Stadiums, Hospitals, Digital Signage, Assisted Living, RVs, Houses of Worship,  Fitness Centers and more.

Professional Construction with 5 Years warranty - Made In USA


Converts 4 Antenna Frequencies / Selected Received TV Services from each > TO > QAM + IPTV Streaming + ASI
Distribute the wanted tv channels over regular coax to all QAM Cable TVs and the IP WIFI/LAN over PC, Tablets, Mobile
Easy installation, connect the Antenna In, and Coax out, keeping the original TV Channel quality and Any Dolby Audio
Connect the Input Antenna One antenna can be jumpered to all inputs, or independent antennas
Set the frequencies Set the wanted antenna frequencies / receive all channels from each
For PAYTV, Insert Smart Cards In case of pay tv channel, insert the CAM+SMART Cards
List and Select the TV Channels Select the TV Services you want to output from the received List
Set the QAM Cable Out Set the destination channel numbers and popup names you want to TVs per each channel
Connect your COAX distribution Inject the coax out to the existing coax network, rescan and watch on all tvs
For IPTV, set the ip addresses Set one ip address per each channel you want to watch over lan/wifi
For IPTV,Connect your IP Network Connect our IPTV RJ45 LAN out port to your IP Switch, wifi, router, network
For IPTV,Play on your IP Devices Play the channels on computers, Tablets, Mobile devices, or IPTV Boxes
Antenna Inputs
Antenna Types ATSC OFF-AIR
Also available  DVB-S/S2 SAT, DVB-T/T2, DVBC/C2, ISDBTb, DMBT
Number of Antenna Inputs 4x F-TYPE connectors with loop-out to daisy-chain multiple tuners to the same antenna
Coax Jumpers included in the box
Descrambling Features
System Compatibility Fully Compatible to Any Conditional Access System
CAM Slots 4x Common Interface Multi-Simultaneous-Program-Descrambling each
Programs to Cam Map Select by software which programs goes to the CAM for descrambling
Multi-Channel Descrambling Up to 8+ simultaneous Channels per CAM can be descrambled.
Limits to the max number of simultaneous channels decryption,
might apply depending from the Smart Card CPU capabilities.
Channels Selection
TV Channels selection Select the wanted channels from the received list to the output ( RF / IP / ASI )
Encrypted channels can be descrambled using the proper CAM+Smart Card
Restamp Yes - Can add/drop/restamp names and components of a service down to PIDs level
MUX out Yes - Selected Services can output in MUX to the ASI MPTS BNC port
SI & TABLES All Descriptors and Tables from the transport streams can be routed out
RF Output
Set Channels Out Set the Frequencies to use to distribute over your internal coax - up to 4 qam
Set Channel Names You can route all the incoming HD/SD channels as well radio services, and assign the name you want
Set Channel Names Assign the destination Major/minor channel number each tv service will take on your TVs
ASI Input Please use the BT model for remultiplexing features and ASI I/O
ASI Out Please use the BT model for remultiplexing features and ASI I/O
IPTV Output
IP Streaming Out Yes - 1x Gigabit IPTV streaming output port
Type of stream 1x MPTS UDP Multi Program Transport Streams, IGMP, Multicast/Unicast
Bitrate Per Each service Original as received from the antenna
Front Panel Control through display and panel keyboard
NMS Remote Control Integrated WEB interface to login and remote control from anywhere
SNMP Remote Control SNMP control via standard MIB file driver - compatible to any NMS SNMP software
Interface Dedicated RJ45 100 Base-T Ethernet Network Port - can operate over the internet, remotely
Channels Expansion
Multiple Units Can connect Multiple Units also of different models for the wanted number of channels
Power Internal Professional Power Supply with power switch - 100-240VAC 50/60Hz, 65W max
Enclosure Dimensions 1.72" H x 19" W ( rack ears ) x 16.5" D
43.6 mm H x 482.6 mm W x 420 mm D
System Weight 8.4 lbs (3.8 kg )
Shipping Dimensions (individual) Carton Box 5.2" H x 23" W x 23" D
132 mm H x 584 mm W x 584mm D
Shipping Weight 13.3 lbs (6 kg)
Cooling Natural Air Circulation and redundant fans
MTBF 55,000 hours
Compliance FCC Class A, IEC60065, EN61000, CE, RoHS, RCM, C-Tick
Warranty 5 years
Rear Panel Available connectors and layout changes based on model and options
The content of this document is subject to revision without  notice due to continued progress in methodology, design and  manufacturing.
PVI shall have no liability for any error or damage of any kind resulting from the use of this document.
Cables and accessories
Power Cord Included - compatible to your country socket
Antenna Coax Jumpers 3x Included
CAM Modules CAM modules to Fit Smart Cards can be purchased searching online as needed
Rack Mount Ears Included
COAX to HDMI Decoder.   Non refundable item.
COAX to HDMI Decoder. Non refundable item.
Recently Viewed Items
  • Visa
  • Mastercard
  • Amex
  • Discover
Subscribe to our Newsletter